We offer a wide range of edge profiles. From simple to complex, from cnc machined to hand made. Here are some examples of the most popular edges. Custom edges may be ordered when needed.
Since 1996 Roman Marble Design has worked on thousands of projects in the D/FW metroplex and North Texas area. We work with custom home builders as well as directly with home owners looking to remodel their homes and add value to their property. Our experience gives us the edge
Our 25,000 sq. ft. facility is located in Irving, TX.
Get to Know Your Stone.
The first step in proper stone care and maintenance is to understand your stone’s geological classification and composition. this information will help you to identify what cleaning products to use and how best to care for your natural stone.
Natural stone is categorized into three basic geological classifications by their respective formation processes: Sedimentary, Metamorphic and igneous. Additionally, stones in each category can be either Calcareous or Siliceous.
Calcareous stone is composed mainly of calcium carbonate, a chemical compound commonly found in natural stone, shells and pearls. Calcium Carbonate is sensitive to acidic solutions so mild, non-acidic cleaners are recommended.
To get the longest life and preserve the beauty of your natural stone, follow these simple tips:
Coasters: Use coasters under all glasses, particularly those containing alcohol or citrus juices.
Trivets: While many stones can withstand heat, the use of trivets or mats is recommended.
Dust Mopping: Dust mop interior floors frequently using a clean non-treated dry dust mop. Sand, dirt and grit are abrasive and can damage natural stone.
Mats/rugs: Mats or area rugs inside and outside an entrance will help to minimize the sand, dirt and grit that may scratch the stone floor. Be sure that the underside of the mat or rug is a slip resistant surface.
Vacuum cleaners: If used, be sure the metal or plastic attachments or the wheels are not worn as they can scratch the surface of some stones.
Spills: Blot the spill with a paper towel immediately. Don’t wipe the area, it will spread the spill. Flush the area with water and mild soap and rinse several times. Dry the area thoroughly with a soft cloth. Repeat as necessary.
Clean stone surfaces with a neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water.
Similar to any item cleaned in your home, an excessive concentration of cleaner or soap may leave a film and cause streaks. Follow manufacturer recommendations.
Use a clean rag mop on floors and a soft cloth for other surfaces for best results.
Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth.
Change the rinse water frequently.
In the bath or other wet areas, soap scum can be minimized by using a squeegee after each use. To remove soap scum, use a non-acidic soap scum remover or a solution of ammonia and water (about 1/2 cup ammonia to a gallon of water). Frequent or over-use of an ammonia solution may eventually dull the surface of some stone types.
In outdoor pool, patio or hot tub areas, flush with clear water and use mild bleach solution to remove algae or moss.
Many suppliers offer products used for stone cleaning.
Products containing lemon, vinegar or other acids may dull or etch calcareous stones.
Scouring powders or creams often contain abrasives that may scratch certain stones.
Many commercially available rust removers (laundry rust stain removers, toilet bowl cleaners) contain trace levels of hydrofluoric acid (HF). This acid attacks silicates in addition to other minerals. All stones, including granite and quartzite, will be attacked if exposed to HF.
Do not mix ammonia and bleach. This combination creates a toxic and lethal gas.